Modulo Plus 230v Motorised Ball Valves

A range of 230V motorised valves available in 2 port zone or 3 port diverter options. Sizes between 1 ¼” and 2”. Actuator motor torque of 28Nm.

Technical Data

The range, called Modulo Plus is available in 1 1/4”, 1 1/2” and 2”.

  • The powerful motor (28Nm @ 230v) – allows them to be used with larger heating systems
  • The Modulo Plus range for use in large domestic or commercial systems, available with either female BSP or Male Union BSP connections.
  • Included as standard the ability to signal via volt free connection to a pump or boiler.
  • An insulating shell can also be bought to prevent heat loss

These motorised ball valves are available as 2 port zone valves or three port diverter valves. They are ‘motor open’ and ‘motor close’ valves and cannot be used as mid-position or mixing valves.

Please refer to the Emmeti Price List or the ‘Downloads’ section below or contact the office on 01993 824900 for technical details.

Downloads

Technical


Installation Guide Wiring Connections for Modulo Compact and Modulo Plus Actuators Oct 2012

Installation Guide containing wiring diagram for Modulo Compact and Modulo Plus

Technical Product Guide Modulo Plus Jun 2013

Technical Guide covering dimensional drawings, range and technical specification for Modulo Plus motorised Ball Valves

Technical Product Guide Modulo Plus MBV Jun 2013

Technical Guide covering range and product features for Modulo Plus motorised Ball Valves

Technical Product Guide Motorized ball Valve Modulo Plus Oct 2012

Technical Guide covering range and technical specification for Modulo Plus motorised Ball Valves

Technical Product Guide Separate 230v 24v actuators Oct 2013

Technical Guide covering product range for Modulo Compact and Plus Motorised Ball Valves

FAQS

Are the Modulo Compact and Modulo Plus motorised ball valves temperature operated?
The motorised ball valves will respond to any electrical source, like a switch, timer or thermostat.  They will open and close when the electrical source calls for it, so technically they are temperature operated if you wire them with a thermostat.

Do we sell diverter valves?
Yes we do.  Modulo Compact up to 1" and Modulo Plus up to 2" in 3 or 4-way formats.

Can the Modulo Compact and Modulo Plus motorised ball valves be used in drinking water applications?
No, they are designed to control and divert flow in heating systems and they are not WRAS approved.

Does Emmeti’s Modulo Compact and Modulo Plus Motorised ball valves have an end switch/ auxiliary switch/ proving switch ?
Yes, each actuator has an auxiliary switch (this is the same as an end switch or proving switch).  This is designed to switch on when a 2-way (zone) opens (or switches flow direction in the case of a three-way valve) and allows a boiler, for example, to be switched on when the valve opens and off again when the valve closes/ switches direction.

What are the maximum pressure ratings for the Modulo Compact and Modulo Plus motorised ball valves?
Maximum operating pressure: 40 bar
Maximum differential pressure: 6 bar  

Will other system controls feedback electrically on a Modulo Plus or Modulo Compact valve and cause the motorised valve to open or close when it is not required to?
When correctly wired,  there is no electrical connection between the motor and the auxiliary switch and this will not happen.

Is Modulo Plus the same size as Modulo Compact?
No, 1 1/4", 1 1/2" and 2" Modulo Plus has got a bigger more powerful motor @ 28Nm.  Modulo Compact is 1/2", 3/4" and 1" @ 8Nm only.

Do Emmeti Modulo Compact and Modulo Plus motorised valves have full bore valve bodies?
Yes, they do.

Do Emmeti’s Modulo Compact and Modulo Plus Motorised ball valves have a spring return?
No, each valve body type has its own actuator which requires a permanent live, switched live and neutral for correct operation (this is not a spring return actuator type). The motor drives the ball valve to rotate in the horizontal plane in relation to the body.

Is the 2 port valve body open when taken out of the box?
Yes, the valve body is open when first installed, it will close when the actuator is installed and Permanent Live and Neutral are connected.

Are the 2 and 3 port actuators interchangeable?
No they are separate items: 2 port 01420170, 3 port 01420172