Pipe Conduit

There are many different systems on the market. Generally in the UK we use press fittings, which are a form of crimping. Connection is reached by pushing the outer sleeve to pipe, compressing it between the sleeve and  the inner brass piece. This is achieved using a mechanical press tool. Emmeti offer a range of these, please ask for further information.

Please purchase U9240018 22mm x 1” BSP Male copper adaptor. Ensure you follow the pipe manufacturer’s instructions on how to connect to 22mm copper adaptors.

This is achievable; you must ensure the joint is sealed with a protective tape (permanent adhesive like duct tape) to ensure screed does not seap in to the monoblocco pipe connector, as this will erosion of the seals over time, and perhaps create leaks. However where possible this should be avoided.

If the pipe is exposed, you can cut into it, and place a tee-piece (code 28103200), with two inline 24x19 monoblocco threads and a 1/2" FBSP connection, facing this upwards (fitted as an inverted tee). Choose monoblocco connectors from our range to match your pipe (take care of the pipe wall thickness). Then screw in a manual air vent 00400004 into the tee.

Yes; however our fittings are sold separatley to be made in to a coupling;  a straight male-male threaded fitting 28103080 and 2 Monoblocco connectors, one on each side of the fitting (correct for type and size of pipe). Threaded fittings and Monoblocco connectors