TST-11 LCD Touchscreen Prog Thermostat

TST-11 LCD Touchscreen Prog. Thermostat

The TST-11 programmable wall mounted thermostat has an extra-large backlit LCD display together with a simple touchscreen user interface to set the programme times and temperatures. It offers 5+2 day, 6+1 day or 7 day programming with up to 6 time/temperature settings per day, frost protection, manual override, optimum start and holiday mode functions. It includes a remote sensor which enables the thermostat to control air temperature only, floor temperature only or air and floor temperature together. 230V and 24V versions available.

Technical Data

Electronic digital touchscreen programmable thermostat with on-off contacts for 230V AC operation. Large simple clear, backlit, LCD display. Temperature differential 1oC.

The remote sensor included enables the thermostat to be used for floor sensing or for remote sensing in bathroom applications. The thermostat can be set to sense air temperature only, floor temperature only or air and floor temperature combined.

Programming allows six time / temperature settings per day with a choice of 7-day, 6+1 day or 5+2 day programming options. Also has built-in frost protection set at 5oC, holiday programming and manual override features included. Designed to fit into a single gang 35mm deep backbox. Terminal rating 5A (inductive loads).

For further technical details, installation requirements and wiring connections please refer to the ‘downloads’ section below.

Downloads

Technical


Emmeti Underfloor Heating Manifolds Sales Brochure

Product and system guide with range information, product features and examples for Under Floor Heating applications

Emmeti Wall Hung Radiator Manifolds Sales Brochure

Product and system guide with selector tables, range information and examples for wall hung radiator manifold applications

Installation Guide U9310010 TST 11 LCD touchscreen programmable thermostat Aug 2014

Installation Guide with operation instructions for using TST-11 LCD Touchscreen Thermostat model U91310010

Technical Product Guide CS11 Complete thermostat range Aug 2014

Technical Guide covering product features, technical specification and wiring diagrams for CS-11 Thermostat range

Installation Guide U9310110 TST 11 24V LCD Touchscreen Programmable Thermostat April 2016

Installation Guide with operation instructions for using U9310110 TST 11 24V LCD Touchscreen Programmable Thermostat

Installation Guide U9310010 TST 11 LCD Touchscreen Programmable Thermostat April 2016

Installation Guide with operation instructions for using U9310010 TST 11 LCD Touchscreen Programmable Thermostat

FAQS

How do I install the floor temperature sensor on Emmeti’s CS-11 7 day programmable thermostat?
We would suggest the floor sensor is mounted in a length of UFH pipe closed at one end, with the open end taken above finished floor level. The pipe should be of sufficient length to detect the temperature of the upper surface of the floor and located where it is not in direct proximity to underfloor heating pipework.

What is the maximum duration of the LCD backlight?
30 Seconds

Does the CS-11 Range and TST -11 come with a remote sensor?
Yes it does, this enables the thermostats to be programmed to Air Only, Floor Only and Air and Floor.

What number of cores are required to wire the CS-11 range?
Currently the CS-11 range are all wired the same; they require Live, Neutral Supply and Switch Live output from the thermostats therefore they require no less than three core cable.

What is the maximum length of extension sensor cable for the CS11 – Range?
Up to 25m of at least 1mm conductors. 

Do our programmable thermostats have NSB (Night Set Back)?
No, they have the ability to set a lower temperature for a set time duration, which is the same function as a NSB thermostat offers

What size wiring / cable do I need for connecting thermostats to an Emmeti EWC wiring centre as part of an underfloor heating system?
Cable Sizing must be carried out by a qualified electrician. In general, 1mm2 twin and earth cable is sufficient, flexible cable to and from the wiring centre should be no less than 0.75mm2